Your One Stop Local Business News

Category: Garage Door Spring Repair

How To Open Garage Door Sensor – First Responder Garage Doors

Garage Door Repair Southlake TX Here’s a guide on how to handle garage door sensors:

1. Understand the Function of Garage Door Sensors: Garage door sensors, also known as photoelectric sensors, are safety devices installed near the bottom of the garage door tracks. They work by transmitting an invisible beam of light between the sensors. If an obstruction breaks the beam while the door is closing, the sensors signal the opener to stop and reverse the door’s movement, preventing accidents or damage.

2. Check for Obstructions: Before adjusting or opening the sensors, inspect the area around them for any obstructions. Clear away debris, objects, or clutter that may be blocking the sensors’ line of sight. Even small items like cobwebs or leaves can interfere with their operation.

3. Clean the Sensors: Dust, dirt, and debris can accumulate on the sensor lenses over time, affecting their ability to detect the infrared beam. Use a clean, dry cloth to gently wipe the sensor lenses and remove any buildup. Avoid using harsh chemicals or abrasive materials that could scratch or damage the lenses.

4. Align the Sensors: Misalignment is a common issue that can prevent garage door sensors from functioning correctly. Ensure that both sensors are properly aligned and facing each other across the doorway. Use a level to check if they’re aligned vertically and adjust the sensor brackets as needed to correct any misalignment.

5. Check the Wiring Connections: Inspect the wiring connections between the sensors and the garage door opener motor unit. Ensure that the wires are securely connected to the terminals on both the sensors and the opener. Tighten any loose connections and replace any damaged or frayed wires if necessary.

6. Test the Sensors: Once the sensors are clean, aligned, and properly connected, test their operation to ensure they’re functioning correctly. Stand outside the garage door and press the button on the wall control station or remote control to close the door. Wave your hand or an object in front of the sensors to break the beam while the door is closing. The door should stop and reverse its movement immediately.

7. Adjust the Sensor Range (if necessary): Some garage door openers allow you to adjust the sensitivity or range of the sensors. Consult the owner’s manual for your opener to determine if this feature is available and how to adjust it. Increasing the sensor range can help prevent false detections and ensure reliable operation.

8. Test the Door Again: After making any adjustments to the sensors, test the garage door again to verify that it opens and closes smoothly without any issues. Repeat the testing process several times to ensure consistent operation.

9. Perform Regular Maintenance: To keep your garage door sensors in good working condition, perform regular maintenance such as cleaning, alignment checks, and testing. Address any issues promptly to prevent accidents or damage to the door.

Garage Door Repair Southlake TX If you encounter persistent issues or if the sensors fail to function correctly despite troubleshooting, consider seeking professional assistance to diagnose and repair the problem.

First Responder Garage Doors

180 State St Suite 225, Southlake, TX 76092, United States

1-817-991-5551

How To Get Concrete Off Garage Door – Camco Commercial Door Company


Garage Door Repair Heiskell TN  Whether the concrete is dried-on splatter from a construction project or a buildup of hardened residue over time, there are several methods you can use to safely remove it without damaging the door.

Here’s a detailed guide on how to get concrete off a garage door:

1. Assess the Situation: Before attempting to remove the concrete, assess the extent of the buildup and determine the best approach for removal. Take note of the size of the affected area, the type of concrete (e.g., fresh or dried), and any potential risks to the door’s surface.

2. Gather Your Materials: Depending on the severity of the concrete buildup and the type of garage door material, you may need the following materials and tools:

  • Protective gloves and goggles
  • Plastic putty knife or scraper
  • Soft-bristled brush or broom
  • Bucket of warm, soapy water
  • Commercial concrete remover or solvent (if necessary)
  • Power washer or pressure washer (if available)
  • Vinegar or lemon juice (for natural cleaning)

3. Start with Gentle Methods: If the concrete is still wet or fresh, start by gently scraping it off the garage door using a plastic putty knife or scraper. Work slowly and carefully to avoid scratching or damaging the door’s surface. If the concrete is hardened or dried-on, skip to the next step.

4. Apply Soapy Water: For dried-on concrete, dampen the affected area with warm, soapy water to help soften and loosen the residue. Use a soft-bristled brush or broom to scrub the area gently, working in small sections at a time. Rinse the door with clean water periodically to remove loosened concrete particles.

5. Use Commercial Concrete Remover: If soapy water alone is not effective, consider using a commercial concrete remover or solvent specifically designed for removing hardened concrete from surfaces. Follow the manufacturer’s instructions carefully and apply the remover to the affected area using a brush or sponge. Allow the remover to penetrate the concrete for the recommended amount of time before attempting to remove it.

6. Scrub and Rinse: After applying the concrete remover, use a soft-bristled brush or scrubbing pad to agitate the surface and help break up the concrete residue. Work in small, circular motions, applying gentle pressure to avoid damaging the door. Rinse the door thoroughly with clean water to remove the dissolved concrete and leftover residue.

7. Consider Natural Alternatives: If you prefer a more eco-friendly approach, you can try using natural cleaning agents such as vinegar or lemon juice to remove dried-on concrete. Simply apply the vinegar or lemon juice to the affected area and allow it to sit for several minutes before scrubbing with a brush and rinsing with water.

8. Repeat as Needed: Depending on the severity of the concrete buildup, you may need to repeat the cleaning process several times to achieve satisfactory results. Be patient and persistent, and avoid using harsh chemicals or abrasive tools that could damage the door’s surface.

9. Use a Power Washer (Optional): If you have access to a power washer or pressure washer, you can use it to help remove stubborn concrete residue from the garage door. Adjust the pressure settings to a low or medium level to avoid causing damage, and use a wide-angle nozzle to disperse the water evenly across the surface.

10. Dry and Inspect: Once the concrete has been removed, dry the garage door thoroughly with a clean towel or cloth. Inspect the door carefully for any signs of damage or remaining residue, and touch up any areas as needed.

11. Apply Protective Coating (Optional): To prevent future buildup of concrete or other debris on the garage door, consider applying a protective coating or sealant to the surface. This will help repel water, dirt, and other contaminants and make cleaning and maintenance easier in the future.

12. Maintain Regularly: To keep your garage door looking its best and prevent future buildup of concrete or other substances, perform regular cleaning and maintenance as needed. Sweep or rinse the door regularly to remove dirt, debris, and other contaminants, and address any spills or stains promptly to prevent them from hardening or drying on the surface.

Garage Door Repair Heiskell TN  By following these steps and taking the necessary precautions, you can safely and effectively remove concrete buildup from your garage door and restore its appearance and functionality. If you encounter any difficulties or are unsure about how to proceed, consider seeking professional assistance to avoid causing damage to the door.

Camco Commercial Door Company

853 East Wolf Valley Rd. Heiskell, TN 37754

1-865-776-9455

How To Program Subaru Garage Door – Brothers Garage Door Service

Garage Door Repair Livonia MI involves syncing your garage door remote with your Subaru vehicle’s system.

is a universal garage door opener system integrated into many Subaru vehicles. Below is a detailed guide covering the process comprehensively:

1. Determine Compatibility:

  • Ensure that your garage door opener is compatible with the HomeLink system in your Subaru vehicle. Most garage door openers manufactured after 1993 are compatible, but it’s essential to check compatibility information in your vehicle’s manual or on the HomeLink website.

2. Locate the HomeLink Buttons:

  • In your Subaru vehicle, locate the HomeLink buttons typically found on the ceiling console or on the rearview mirror. These buttons may be labeled with an icon resembling a house or garage door.

3. Clear Existing Codes (Optional):

  • If you are programming a new garage door opener or replacing an existing one, consider clearing the existing codes from the HomeLink system. To do this, press and hold the outer two buttons on the HomeLink console simultaneously until the indicator light begins to flash rapidly (typically about 20 seconds).

4. Put HomeLink into Programming Mode:

  • Press and hold the desired HomeLink button you wish to program (often labeled as Button 1, 2, or 3). While holding the button, simultaneously press and hold the “Learn” button on your garage door opener. The location of the “Learn” button may vary depending on the opener model.

5. Learn the Garage Door Opener Code:

  • Continue holding both buttons until the HomeLink indicator light changes from flashing slowly to flashing rapidly. This indicates that HomeLink has learned the code from your garage door opener.

6. Program HomeLink:

  • Once the indicator light is flashing rapidly, release both buttons. Test the HomeLink button by pressing it to see if it activates your garage door opener. If the door does not activate, repeat the programming process.

7. Test the HomeLink System:

  • Park your vehicle outside the garage and turn on the ignition. Press the programmed HomeLink button inside the vehicle for about 2 seconds and release it. Observe if the garage door opens or closes. If it doesn’t, repeat the programming steps or refer to troubleshooting in your vehicle’s manual.

8. Secure Documentation:

  • Record the programming instructions and the button you programmed for future reference. Keep track of any additional programming details provided in your vehicle’s manual.

9. Troubleshooting:

  • If you encounter any issues during the programming process, refer to the troubleshooting section of your vehicle’s manual or contact Subaru customer support for assistance. Common issues may include incorrect programming sequences or interference from other electronic devices.

Garage Door Repair Livonia MI Always consult the specific instructions provided by Subaru for your particular vehicle model.

Brothers Garage Door Service

29522 Wentworth St, Livonia, MI 48154, United States

1-734-292-0971

Powered by WordPress & Theme by Anders Norén