Mounting garage door sensors is an essential part of the installation process as they play a crucial role in ensuring the safety and proper operation of your garage door.

When I mounted my garage door sensors, I followed these steps from Carlsbad Garage Door to ensure the safety and proper functioning of my garage door:

  1. I gathered all the necessary tools and materials for the job, including the garage door sensors (consisting of a transmitter and receiver), mounting brackets, screws or adhesive tape (depending on the type of sensors), power drill (if using screws), screwdriver (if using screws), level, measuring tape, and safety goggles.
  2. I identified the appropriate location for mounting the sensors. I positioned them on the vertical tracks near the bottom, slightly above the ground. The receiver sensor was typically mounted on the left track, while the transmitter sensor was mounted on the right track.
  3. Using a measuring tape, I determined the proper height for mounting the sensors. I ensured they were aligned with each other and positioned to face each other across the garage door. I marked the locations where I would mount the sensors on the vertical tracks.
  4. If required, I prepared the mounting brackets for the sensors. Following the manufacturer’s instructions, I securely attached the brackets to the sensors.
  5. Starting with the receiver sensor, which is usually mounted on the left track, I positioned it at the marked location on the track. If I was using screws, I used a power drill and screwdriver to attach the sensor to the track using the provided screws. I made sure the sensor was level and firmly mounted.
  6. Moving on to the transmitter sensor, I positioned it at the marked location on the right track. I ensured it was aligned with the receiver sensor across the garage door. If screws were necessary, I attached the sensor to the track using the provided screws and a power drill and screwdriver. I checked that the sensor was level and securely mounted.
  7. Once both sensors were securely mounted, I connected them according to the manufacturer’s instructions. This typically involved connecting the transmitter sensor to the garage door opener unit using wires or cables. I followed the provided wiring instructions carefully to ensure proper connectivity.
  8. To test the alignment of the sensors, I closed the garage door slowly and observed the LED lights on the sensors. The lights should have been solid or changed color, indicating that the sensors were properly aligned and detecting each other. If the lights blinked or did not illuminate, it meant that the alignment was off. In such cases, I adjusted the sensor positions until the lights indicated proper alignment.
  9. I secured any loose wires or cables from the sensor connections using zip ties or clips. This prevented interference with the operation of the garage door or the sensors. I organized the wires neatly and kept them away from moving parts.
  10. Performing a final test was crucial. I opened and closed the garage door multiple times, carefully observing the sensor lights and ensuring that the door stopped and reversed if an object obstructed its path. I made any necessary adjustments to the sensor positions or alignment until the safety features functioned correctly.

In conclusion, according to Carlsbad Garage Door, I successfully mounted my garage door sensors, prioritizing the safety and proper operation of my garage door. It’s important to always refer to the manufacturer’s instructions for specific guidelines and consult a professional if any difficulties or specific questions arise.

Carlsbad Garage & Overhead Doors

300 Carlsbad Village Dr 108a 205, Carlsbad, CA 92008, United States

760-350-3536