Repairing a Garage Door Repair Haslet TX can be a daunting task, especially if you don’t have any prior experience in doing so. However, with the right tools and guidance, it can be a simple and straightforward process.

In this article, we will provide you with a step-by-step guide on how to repair a garage door:

Step 1: Identify the Problem The first step in repairing a garage door is to identify the problem. There are several common issues that can occur with a garage door, including broken springs, damaged panels, malfunctioning opener, and misaligned tracks. Inspect the door thoroughly to determine the root cause of the problem.

Step 2: Gather the Required Tools Once you have identified the problem, you will need to gather the necessary tools to fix it. Some of the tools you will need include a screwdriver, pliers, wrenches, hammer, pry bar, and lubricant. It is also essential to ensure that you have the right replacement parts if needed.

Step 3: Disable the Opener Before you start working on the garage door, you need to disable the opener to ensure that it does not accidentally activate while you are repairing it. To do this, unplug the opener from the power source or turn off the circuit breaker that powers the opener.

Step 4: Fix Broken Springs One of the most common problems with a garage door is broken springs. To repair this, first, you need to identify the type of springs your garage door has. There are two main types of springs- torsion and extension springs. Torsion springs are mounted above the door, while extension springs are located on either side of the door. Use caution when working with springs as they are under high tension and can cause injury if mishandled.

For torsion springs, use a winding bar to unwind the spring and remove it from the torsion tube. Then, replace the broken spring with a new one of the same size and reattach it to the tube. Finally, use the winding bar to wind the spring back to its original tension.

For extension springs, you will need to disconnect the springs from the door and then replace them with new ones of the same size. To disconnect the springs, release the tension on them by pulling the safety cable through the spring and then unhook the spring from the track hanger.

Step 5: Repair Misaligned Tracks If the garage door is not moving smoothly, it could be due to misaligned tracks. To fix this, first, use a level to check the alignment of the tracks. If they are misaligned, loosen the bolts holding the track in place and adjust the track until it is level. Then, tighten the bolts again and check the alignment with the level.

Step 6: Replace Damaged Panels If your garage door has damaged panels, you will need to replace them. To do this, remove the old panel by unscrewing the hinges and removing the panel from the door. Then, attach the new panel to the hinges and reattach the hinges to the door.

Step 7: Lubricate Moving Parts Finally, it is important to lubricate the moving parts of the garage door regularly to ensure that it operates smoothly. Use a lubricant specifically designed for garage doors and apply it to the rollers, hinges, and tracks.

In conclusion, repairing a Garage Door Repair Haslet TX requires careful attention to detail and the right tools. By following the steps outlined in this article, you can fix common garage door problems and keep your door in good working condition. However, if you encounter any issues that you are not comfortable fixing yourself, it is best to call a professional garage door repair service.

Haslet Best Garage & Overhead Door

817-242-5042