If you need to reset your garage door remote, don’t worry – it’s a relatively simple process that you can do yourself.
Here’s a step-by-step guide on how to do it based from Garage Door Azle TX:
First, I located the learn button on the back or side of the motor unit. It’s usually a large, round button that’s colored red, yellow, or purple. I pressed and held the learn button until the indicator light turned on.
Next, I needed to erase the existing codes from my remote. To do this, I held down the button on my remote that I wanted to reset until the indicator light on the garage door opener blinked once, indicating that the code had been erased.
Once the codes were erased, I was ready to program the remote. I pressed the button on the remote that I wanted to use to operate the garage door, and held it until the indicator light on the garage door opener blinked twice, indicating that the remote had been programmed.
After programming the remote, I tested it to make sure it was working properly. I stood near the garage door opener and pressed the button on the remote. The door started moving, and I could hear the motor unit activating.
If I had multiple remotes that I wanted to reset, I repeated these steps for each remote.
Finally, I pressed the learn button on the garage door opener to exit programming mode. The indicator light turned off, indicating that I had successfully exited programming mode.
In conclusion, as stated in Garage Door Azle TX, resetting my garage door remote was a quick and easy process that I was able to do myself. However, if you encounter any issues or are not comfortable performing the task yourself, it’s always a good idea to contact a professional garage door technician to assist you.
Garage Door Experts of Azle
328 W Main St., Azle, TX 76020
817-646-8862