Garage Door Repair Norcross GA springs play a crucial role in the smooth operation of your garage door. Over time, these springs may wear out and require replacement. While it’s recommended to hire a professional for this task due to the potential dangers involved, some individuals with the necessary skills and experience may choose to change the garage door springs themselves.

This step-by-step guide will provide you with instructions on how to change a garage door spring safely and effectively.

Please note that working with garage door springs can be hazardous. It is essential to exercise caution and follow all safety precautions. If you are unsure about any aspect of the process, it is strongly advised to consult a professional garage door technician.

Tools and Materials: Before beginning, gather the following tools and materials:

  1. Safety glasses
  2. Leather gloves
  3. Adjustable wrench
  4. Vise grips
  5. C-clamps
  6. Ladder
  7. Replacement garage door springs (make sure they are compatible with your specific door)

Step 1: Disconnect the Power: To ensure your safety, start by disconnecting the power to the garage door opener. Locate the power cord and unplug it from the electrical outlet.

Step 2: Release Tension on the Existing Spring: Garage door springs are under a significant amount of tension, so it’s essential to release this tension before attempting to remove them. Use a pair of vise grips to secure the garage door track just below the bottom roller to prevent the door from opening. Then, carefully detach the safety cables from the spring. Use a C-clamp to secure the door to prevent it from unexpectedly opening while you’re working.

Step 3: Remove the Old Springs: Using an adjustable wrench, loosen the set screws on the stationary cones located at each end of the spring. Once the set screws are loose, use the wrench to unwind the springs from the cones, being cautious of the tension. Slowly and carefully remove the old springs.

Step 4: Install the New Springs: Attach the new springs to the stationary cones by winding them in the opposite direction of the old springs. Ensure that the spring coils are properly aligned and that there is an equal number of coils on each side. Use the adjustable wrench to tighten the set screws on the cones to secure the new springs in place.

Step 5: Test the Balance: With the new springs in place, slowly remove the C-clamps and vise grips, allowing the door to rest on the floor. Manually lift the door halfway and release it. The door should remain in place without moving up or down. If the door is imbalanced or doesn’t stay in position, it may require further adjustments. In such cases, it is recommended to consult a professional.

Step 6: Reconnect the Power: Once you have confirmed that the door is properly balanced, reconnect the power to the garage door opener by plugging in the power cord.

Conclusion: Changing a Garage Door Repair Norcross GA spring can be a challenging task that requires proper knowledge and precautions. While it is possible to change the springs yourself, it is highly recommended to hire a professional garage door technician to ensure the task is performed safely and accurately. If you decide to proceed on your own, follow the steps outlined in this guide carefully and exercise caution throughout the process.

Southern Home Garage Door Norcross

5950 Live Oak Pkwy # 300, Norcross, GA 30093

1-770-799-6943