Extension springs play a crucial role in counterbalancing the weight of the Garage Door Repair Suwanee GA making it easier to open and close.
Here’s a step-by-step guide on how to install extension springs on a garage door:
Step 1: Gather Necessary Tools and Equipment:
Before you begin, make sure you have all the tools and equipment required for the installation. This typically includes:
- Safety glasses
- Work gloves
- Adjustable wrench
- Socket wrench set
- Vice grips
- Ladder
- Tape measure
- Marker or pencil
- Safety cables (if not already installed)
Step 2: Prepare the Garage Door:
Before installing the extension springs, ensure that the garage door is in the closed position and securely supported. Use locking pliers or clamps to secure the door to prevent it from accidentally falling during the installation process.
Step 3: Determine the Correct Spring Size:
Measure the height of the garage door to determine the appropriate size of the extension springs needed. Extension springs are available in various sizes and weight capacities, so choose springs that match the specifications of your garage door.
Step 4: Install Safety Cables (if necessary):
If your garage door does not already have safety cables installed, it’s essential to add them before installing the extension springs. Safety cables prevent the extension springs from becoming projectiles in case of breakage, reducing the risk of injury or property damage.
- Attach one end of each safety cable to the bottom bracket of the garage door track using the provided hardware.
- Thread the opposite end of each safety cable through the corresponding hole in the extension spring and secure it with a cable clamp.
Step 5: Install the Extension Springs:
- Begin by installing the first extension spring on one side of the garage door. Position the spring so that the stationary end (with the eye bolt) is attached to the track hanger or support bracket near the rear of the horizontal track.
- Use a socket wrench to tighten the lag screw securely into the track hanger or support bracket.
- Next, install the pulley and safety cable bracket on the same side of the garage door, positioning it approximately halfway between the stationary end of the extension spring and the garage door pulley.
- Repeat the process to install the second extension spring on the opposite side of the garage door, ensuring that it is aligned symmetrically with the first spring.
Step 6: Connect the Springs to the Track and Door:
- Thread the other end of each extension spring through the pulley and safety cable bracket, ensuring that the spring is oriented correctly.
- Attach the extension spring to the track angle or adjustable track bracket near the top corner of the garage door using an adjustable wrench.
- Connect the safety cable to the eye bolt at the end of each extension spring and secure it with a cable clamp.
Step 7: Test the Door Operation:
After installing the extension springs, carefully remove any clamps or locking pliers securing the garage door and test its operation. Open and close the door several times to ensure that it moves smoothly and evenly.
Step 8: Make Adjustments (if necessary):
If the garage door does not operate correctly or if there are any signs of imbalance, you may need to adjust the tension of the extension springs. Refer to the manufacturer’s instructions for guidance on adjusting the tension safely.
Step 9: Perform Regular Maintenance:
Once the extension springs are installed and adjusted properly, it’s essential to perform regular maintenance to ensure their continued safe and reliable operation. Periodically inspect the springs for signs of wear or damage and lubricate the pulleys and cables as needed.
Conclusion:
If you’re unsure about any aspect of the installation process, consider hiring a professional Garage Door Repair Suwanee GA technician to assist you.
Southern Home Creations Garage Doors & Openers
4110 Tench Rd Suite D, Suwanee, GA 30024, United States
1-770-831-0301
https://maps.app.goo.gl/RooJByBqbJz28knC8