Here’s a step-by-step guide from Medina Garage Door on how to reattach a garage door cable:
- Ensure Safety:
- Before starting any work, put on safety glasses and gloves to protect yourself from any potential injuries.
- Disconnect the Opener:
- Disconnect the garage door opener from the power source to prevent any accidental activation while working on the cables.
- Identify the Problem Cable:
- Determine which cable needs to be reattached. Inspect both sides of the garage door to identify the one that has come loose or detached.
- Release Tension on the Cable:
- Locate the tension adjustment mechanism on the garage door track. It usually consists of a threaded rod or an adjustable plate.
- Use a pair of pliers or a wrench to loosen the adjustment mechanism, relieving tension on the cable.
- Remove the Cable from the Pulley:
- Find the cable drum near the top of the garage door track.
- Carefully unwind the cable from the drum, ensuring it doesn’t unravel completely.
- Reattach the Cable to the Pulley:
- Thread the loose end of the cable through the pulley near the top corner of the garage door.
- Pull the cable down toward the bottom bracket.
- Reattach the Cable to the Bottom Bracket:
- Locate the bottom bracket at the bottom corner of the garage door.
- Slide the end of the cable into the slot or hole on the bottom bracket.
- Secure the Cable:
- Use a cable clamp to secure the cable to the bottom bracket.
- Position the clamp over the cable and tighten it using a screwdriver or pliers.
- Wind the Cable onto the Drum:
- With the cable securely attached to the bottom bracket, begin winding it back onto the drum.
- Use a winding bar or a pair of pliers to rotate the drum, guiding the cable as it wraps around it.
- Ensure the cable winds evenly and tightly onto the drum.
- Tension the Cable:
- Adjust the tension on the cable by tightening the tension adjustment mechanism.
- Follow the manufacturer’s instructions or consult a professional to determine the appropriate tension for your specific garage door model.
- Repeat the Process for the Other Cable (if needed):
- If the other cable also needs reattachment, repeat the above steps on the opposite side of the garage door.
- Test the Door’s Operation:
- Once both cables are reattached, remove any clamps or supports holding the door in place.
- Reconnect the garage door opener to the power source and test the door’s operation.
- Open and close the door several times to ensure it moves smoothly without any issues.
Remember, based from Medina Garage Door, if you encounter any difficulties or are unsure about the process, it’s best to seek the assistance of a professional garage door technician. They have the necessary expertise and tools to handle garage door repairs safely and effectively.
Medina Garage & Overhead Doors
3745 Medina Rd Suite H, Medina, OH 44256, United States
330-785-7630