Rewinding a Garage Door Repair Houston TX cable is not an easy task and requires some mechanical knowledge and expertise. Before attempting to rewind the cable, it is important to make sure that the garage door is in the closed position and the power to the opener is disconnected.

Here is a step-by-step guide on how to rewind a garage door cable:

Step 1: Gather the necessary tools and equipment To rewind the garage door cable, you will need the following tools and equipment:

  • Safety glasses
  • Leather gloves
  • Adjustable wrench
  • Cable winding bars
  • Screwdriver
  • Vice grips
  • Replacement cable (if necessary)

Step 2: Remove the tension from the cable Using the adjustable wrench, loosen the set screws on the cable drum until they are completely disengaged. Once the set screws are disengaged, use the winding bars to unwind the cable from the drum, making sure to keep a firm grip on the bars.

Step 3: Remove the cable Once the cable is completely unwound from the drum, use the screwdriver to remove the screws that secure the cable to the bottom bracket. Once the screws are removed, carefully remove the cable from the bracket and the pulley.

Step 4: Inspect the cable Before you rewind the cable, inspect it for any damage, such as fraying or kinking. If the cable is damaged, it will need to be replaced.

Step 5: Wind the cable To rewind the cable, begin by feeding the end of the cable through the hole in the bottom bracket. Next, wrap the cable around the drum in a clockwise direction, making sure to keep the cable tight and evenly spaced on the drum.

Step 6: Tension the cable Using the winding bars, wind the cable onto the drum until it is tight. Once the cable is tight, use the vice grips to hold the bar in place and tighten the set screws on the drum to secure the cable.

Step 7: Test the door After rewinding the cable, it is important to test the garage door to make sure it is operating properly. Reconnect the power to the opener and test the door by opening and closing it a few times. If the door is not operating smoothly, it may be necessary to adjust the tension on the cable.

In conclusion, rewinding a Garage Door Repair Houston TX cable can be a challenging task, but by following the steps outlined above and taking the necessary safety precautions, you can successfully complete the job. If you are not comfortable performing the task yourself, it is recommended that you contact a professional garage door technician to assist you.

East Downtown Garage Door

4105 Leeland St, Houston, TX 77023, United States

1-713-322-7436