Tag: garage door repair north las vegas nv

Garage door locks serve as an added layer of security for your home and property.

By following the research conducted by North Las Vegas Garage Door, there are different types of locks available for garage doors, each with their own advantages and disadvantages.

1. Deadbolts: Deadbolts are a common lock type for garage doors. They are a simple and effective way to prevent unauthorized entry to your garage. The deadbolt is usually installed on the inside of the garage door and can be locked and unlocked from the inside.
2. Side Locks: Side locks are another popular type of lock for garage doors. They are installed on the sides of the door, typically near the bottom, and require a key to unlock. This lock type offers excellent security but can be difficult to install on some garage door models.
3. T-Handle Locks: T-handle locks are a simple and affordable option for securing your garage door. They are usually installed on the outside of the garage door and require a key to unlock. One disadvantage of this lock type is that they can be vulnerable to forced entry.
4. Slide Bolts: Slide bolts are another popular lock type for garage doors. They are simple to install and use, and offer good security. Slide bolts are installed on the inside of the door and can be locked and unlocked by sliding the bolt into or out of a bracket attached to the door frame.
5. Smart Locks: With the increasing popularity of smart home technology, smart locks have become another option for securing garage doors. These locks can be controlled remotely using a smartphone app, voice commands, or a keypad. Smart locks offer convenience, but can be more expensive than other lock types.

In summary, as per North Las Vegas Garage Door, when choosing a lock method for your garage door, it’s important to consider factors such as cost, ease of installation, level of security, and compatibility with your garage door model. It’s also a good idea to consult with a professional garage door technician to ensure that the lock is installed correctly and does not interfere with the operation of the garage door.

Aztec Garage Door Repair Las Vegas NV

2450 Losee Rd STE A, North Las Vegas, NV 89030, United States

702-415-7904

Disclaimer: Replacing a garage door spring can be dangerous, and it’s recommended to hire a professional for safety reasons. I am an experienced DIYer and felt confident in my abilities, but please proceed with caution and follow all safety precautions.

Here’s a step-by-step guide from Garage Door Repair on how to replace a garage door spring:

1. Safety first:
   • Before starting the project, I made sure to gather all the necessary safety equipment, including safety glasses, gloves, and sturdy footwear.
   • It was important to disconnect the power to the garage door opener to prevent any accidental activation while working on the springs.
2. Identifying the spring type:
   • I carefully examined my garage door to determine the type of spring it had. In my case, it had extension springs located above the horizontal tracks on both sides of the door.
3. Gathering the tools and materials:
   • I collected all the tools and materials I needed, including a socket wrench set, pliers, a ladder, replacement extension springs, safety cables (if required), and winding bars.
4. Securing the garage door:
   • To ensure safety, I secured the garage door in the open position using C-clamps or vice grips attached to the tracks. This prevented the door from closing unexpectedly while I worked on the springs.
5. Removing the old extension springs:
   • I started by disconnecting the safety cables from the old springs, if they were present.
   • Using pliers, I carefully unhooked the extension springs from the safety brackets at the ends of the tracks.
   • Once the springs were detached, I slowly released the tension by stretching them out and removing them from the door assembly.
6. Installing the new extension springs:
   • I installed the new extension springs by attaching them to the safety brackets at the ends of the tracks. I made sure they were securely fastened.
   • If my garage door had safety cables, I reattached them to the new springs according to the manufacturer’s instructions. These cables act as a backup in case a spring breaks.
7. Testing and adjusting the tension:
   • With the new springs in place, I carefully removed the clamps or vice grips, allowing the garage door to lower and apply tension to the springs.
   • I tested the tension by manually opening and closing the garage door. If the door didn’t open smoothly or seemed unbalanced, I made adjustments to the tension by relocating the hooks on the safety brackets or adding/removing spring coils as needed.
   • It was crucial to achieve proper tension to ensure the door’s smooth operation and prevent any undue strain on the springs or other components.
8. Final checks and maintenance:
   • After replacing the springs, I conducted a thorough inspection of the entire garage door system. I checked the cables, pulleys, rollers, and other components for any signs of wear or damage.
   • If I noticed any worn or damaged parts, I promptly replaced them to ensure the safe and efficient operation of the garage door.
   • Additionally, I lubricated all moving parts, including the springs, rollers, and hinges, using a garage door lubricant to reduce friction and promote smooth operation.

Remember, according to Garage Door Repair, replacing garage door springs can be dangerous, and it’s crucial to prioritize safety at all times. If you’re unsure or uncomfortable with any step of the process, it’s strongly recommended to consult a professional garage door technician for assistance.

Aztec Garage Door Repair Las Vegas NV

2450 Losee Rd STE A, North Las Vegas, NV 89030, United States

702-415-7904

Sealing a garage door is an important step to prevent drafts, moisture, and debris from entering your garage.

Here’s a detailed guide on how to seal a garage door according to Garage Door Repair Services:

First, I assess the condition of my garage door by closely examining it for any gaps, cracks, or damaged weatherstripping. I pay particular attention to the edges of the door, between the panels, and at the bottom where drafts, water, or debris may be entering.

Next, I make a list of the necessary materials needed for the sealing process. This may include weatherstripping, garage door threshold seals, sealant, and insulation kits. I measure the dimensions of my garage door to ensure I purchase the correct amount of materials.

Before applying any seals, I clean the garage door and its track thoroughly to create a clean surface for sealing. I mix a mild detergent with water and use a cloth to remove any dirt, grime, or debris. Afterward, I dry the door with a clean cloth.

Now, I’m ready to install or replace the weatherstripping. I carefully remove any old weatherstripping using a flathead screwdriver or pliers, ensuring I don’t damage the door. I clean the area where the old weatherstripping was attached.

Using the measurements I took earlier, I cut the new weatherstripping to the appropriate length. I apply adhesive or use screws to secure the weatherstripping along the sides and top of the door, pressing it firmly against the door to ensure a tight seal.

To create a barrier against water, leaves, and pests at the bottom of the garage door, I install a garage door threshold seal. I clean the surface where the seal will be placed, making sure it is completely dry.

I unroll the threshold seal and position it at the bottom of the garage door, aligning it with the edges. If necessary, I trim any excess length with a utility knife. To secure the threshold seal, I use adhesive or screws, pressing it firmly against the floor to create a tight seal.

If I notice any visible gaps or cracks in the garage door or its panels, I apply sealant or caulk to fill them. I use a caulk gun to apply a generous amount of sealant, making sure it covers the entire area. Then, I use a putty knife or my finger to smooth the sealant for a neat finish.

If I want to improve the insulation of my garage, I consider using an insulation kit. I follow the manufacturer’s instructions to cut the panels to size and attach them to the inside of the garage door, usually using adhesive or clips provided in the kit.

Once I have completed the sealing process, I test the effectiveness of the seals by closing the garage door. I carefully observe the edges, bottom, and panels for any gaps or areas where the seals may not be fully sealed. If I notice any issues, I make any necessary adjustments or add additional seals where needed to ensure a tight seal.

By following these steps from Garage Door Repair Services, I successfully seal my garage door, protecting it from drafts, moisture, and debris. Regularly inspecting the seals and replacing them as needed helps to maintain a secure and well-insulated garage.

Aztec Garage Door Repair Las Vegas NV

2450 Losee Rd STE A, North Las Vegas, NV 89030, United States

702-415-7904