Disclaimer: Replacing a garage door spring can be dangerous, and it’s recommended to hire a professional for safety reasons. I am an experienced DIYer and felt confident in my abilities, but please proceed with caution and follow all safety precautions.

Here’s a step-by-step guide from Garage Door Repair on how to replace a garage door spring:

  1. Safety first:
    • Before starting the project, I made sure to gather all the necessary safety equipment, including safety glasses, gloves, and sturdy footwear.
    • It was important to disconnect the power to the garage door opener to prevent any accidental activation while working on the springs.
  2. Identifying the spring type:
    • I carefully examined my garage door to determine the type of spring it had. In my case, it had extension springs located above the horizontal tracks on both sides of the door.
  3. Gathering the tools and materials:
    • I collected all the tools and materials I needed, including a socket wrench set, pliers, a ladder, replacement extension springs, safety cables (if required), and winding bars.
  4. Securing the garage door:
    • To ensure safety, I secured the garage door in the open position using C-clamps or vice grips attached to the tracks. This prevented the door from closing unexpectedly while I worked on the springs.
  5. Removing the old extension springs:
    • I started by disconnecting the safety cables from the old springs, if they were present.
    • Using pliers, I carefully unhooked the extension springs from the safety brackets at the ends of the tracks.
    • Once the springs were detached, I slowly released the tension by stretching them out and removing them from the door assembly.
  6. Installing the new extension springs:
    • I installed the new extension springs by attaching them to the safety brackets at the ends of the tracks. I made sure they were securely fastened.
    • If my garage door had safety cables, I reattached them to the new springs according to the manufacturer’s instructions. These cables act as a backup in case a spring breaks.
  7. Testing and adjusting the tension:
    • With the new springs in place, I carefully removed the clamps or vice grips, allowing the garage door to lower and apply tension to the springs.
    • I tested the tension by manually opening and closing the garage door. If the door didn’t open smoothly or seemed unbalanced, I made adjustments to the tension by relocating the hooks on the safety brackets or adding/removing spring coils as needed.
    • It was crucial to achieve proper tension to ensure the door’s smooth operation and prevent any undue strain on the springs or other components.
  8. Final checks and maintenance:
    • After replacing the springs, I conducted a thorough inspection of the entire garage door system. I checked the cables, pulleys, rollers, and other components for any signs of wear or damage.
    • If I noticed any worn or damaged parts, I promptly replaced them to ensure the safe and efficient operation of the garage door.
    • Additionally, I lubricated all moving parts, including the springs, rollers, and hinges, using a garage door lubricant to reduce friction and promote smooth operation.

Remember, according to Garage Door Repair, replacing garage door springs can be dangerous, and it’s crucial to prioritize safety at all times. If you’re unsure or uncomfortable with any step of the process, it’s strongly recommended to consult a professional garage door technician for assistance.

Aztec Garage Door Repair Las Vegas NV

2450 Losee Rd STE A, North Las Vegas, NV 89030, United States

702-415-7904